FIRE EXTINGUISHING SYSTEMS CONTROL
It should be regularly checked that the water pressure and water flow and storage amount of water of the buildings needed in case of fire is convenient. In these controls, whether the central fire extinguishing system is operable and its operating performance are examined.

Fire fighting closets and fire hoses are tested and compliance of the fire station water inlet with standards and regulations is checked. Power transmission lines and reserve power stores and whether their manufacturers have a sound operation are checked.

Fire Protection Systems
Regulation on Health and Safety Conditions in Utilization of Work Equipment, ANNEX-III Issues Related to Maintenance, Repair and Periodic Controls;

2.3. Installations
2.3.1. Unless specified otherwise in the relevant standards, the periodic controls of the installations shall be made once a year.
2.3.2. The periodic controls of the electricity network, grounding installation, lightning rod installation and accumulator and transformer and similar electrical installations are made by electrical engineers, electricity technicians or senior technicians.
2.3.3. Periodic controls of installations other than electricity are made by mechanical engineers, and mechanical technicians or senior technicians.
Fire Installations and Hoses, Motor pumps are to be checked at least once a year unless a period is specified in the Pipe Installation Standards, which is made for determination whether they fit the criteria specified in the project.

Field of Test:
• Wet and Dry Piping
• Fire Closets
• Water Inlets
• Hydrants

Type of Test:
• Determination of the Hazard Class and Project Compliance
• Pressure Control
• Flow Rate Control
• Fire Installation Control
• Control of the Fire-Cabinets and Hoses
• Control of Motor Pumps
• Piping Control

Test Standards:
TS 9811, TS EN 671-3, TS EN 12416-1 + A2, TS EN 12416-2 + A1, TS EN 12845 + A2, TS EN 671-3, TSE CEN TS 54-14, Regulation on Protection of Buildings from Fire, Regulation on Health and Safety Conditions in Utilization of Work Equipment

 

GERİ